PTT-ID

(Conventional System, General)

HGDefinitionMob&Port.jpg

Selects the method of  transmitting a PTT ID data packet with a DTMF or MDC transmission. Following each radio-user PTT button press, the radio then transmits the radio's current PTT ID (DotGreen.png the CPS-defined Primary ID) using this selected method. DotBlue.png Transmitting the Primary ID allows for Caller ID on the receiving radio. This feature applies while operating on the current DTMF or MDC Conventional System.

HGWarning.jpg

 

WFForward.png This feature only applies when Conventional Personality that DotYellow.png references this system has its Non-ASTRO PTT ID field enabled.

HGAccessedOnly.jpg

When the System Type field is set to "MDC" or "DTMF".

HGSelections.jpg

SELECTIONS:

DEFINITIONS:

None

PTT IDs are not sent.

Leading Edge

Causes the radio to transmit a PTT ID data packet prior to the transmission of other packet data. Therefore, immediately following each radio-user PTT button press, the radio then transmits the radio's current PTT ID (Primary ID).

Trailing Edge

Causes the radio to transmit a PTT ID data packet following each transmission of other packet data. Therefore, each time the radio-user releases the PTT button the radio then transmits the radio's current PTT ID (Primary ID).

Both

Combines both the Leading and Trailing method for transmitting PTT IDs (Primary ID)

IconSmallNote.png

The Sidetones field allows you to define "PTT-ID Sidetones" and/or "PTT-ID Short Sidetones" when selecting "Leading Edge" or "Both".

GoArrow.jpg

Go to the General Page